1
Vraag
2
Reacties
3
Oplossing
pablocassinerio

Level 2
  • 7Posts
  • 0Oplossingen
  • 2Likes

Modem resets itself

My modem resets itself a few times a day. It seems to get worse after 9PM but it also happens during the day. The white light starts blinking and then the green ones turn on one by one, as if I had reset it manually.

Oplossingen

Geaccepteerde oplossingen
tobiastheebe

Level 20
T.E.A.M.
  • 35284Posts
  • 2609Oplossingen
  • 17750Likes

Taking a closer look at the previous pictures, the apartment appears to be pre-1990, in which case the outlet in the living room is in fact the AOP. This is confirmed by the meter cupboard pictures.

 

The weak downstream power (should be at least -3.5 dBmV) and noise ingress require further investigation by a technician. I suspect a cable problem (i.e. damage) outside the apartment. A new AOP (btv 01-SET/UPC) should be installed as well.

 

A moderator (Ziggo employee) can schedule a technician appointment and will visit this topic within 1-2 days.

Bekijk in context

Monica
Oud Community Moderator
Oud Community Moderator
  • 772Posts
  • 154Oplossingen
  • 262Likes

Hi @pablocassinerio, welcome to the Ziggo Community! I've scheduled an appointment for tomorrow, 11-03-2022 between 8:00-13:00. You will receive a confirmation of this appointment by e-mail. If the selected time-frame does not suit you, you can reschedule the appointment via the link in this e-mail and via your My Ziggo account. 

 

Will you keep us posted?

Bekijk in context

13 Reacties 13
Meldingen
Aan Uit
tobiastheebe

Level 20
T.E.A.M.
  • 35284Posts
  • 2609Oplossingen
  • 17750Likes

Could you post one or more pictures of the AOP (main outlet near electrical meter/fuse box or in living room) and cables, plus splitter(s) and signal amplifier, as applicable?

Additionally, could you post the modem’s downstream/upstream/log data? Instructions can be found here.

pablocassinerio
Topicstarter
Level 2
  • 7Posts
  • 0Oplossingen
  • 2Likes

Hi @tobiastheebe hopefully these pictures are enough. I have no signal amplifier.

 

 

pablocassinerio
Topicstarter
Level 2
  • 7Posts
  • 0Oplossingen
  • 2Likes

Forgot the network log, here:

 

Time Priority Description

10/03/2022 08:42:45Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:42:37Warning!Lost MDD Timeout;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:42:3Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:41:54noticeLAN login Success;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:38:11Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:38:8Warning!Lost MDD Timeout;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:37:47Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:37:46Warning!Lost MDD Timeout;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:37:4Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:37:4Warning!Lost MDD Timeout;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:36:37Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:36:35Warning!Lost MDD Timeout;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:35:27Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:35:23Warning!Lost MDD Timeout;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:35:9Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:34:56Warning!Lost MDD Timeout;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:34:33Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:34:28Warning!Lost MDD Timeout;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:34:0Warning!RCS Partial Service;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
10/03/2022 08:33:59Warning!Lost MDD Timeout;CM-MAC=48:d3:43:ff:e6:e3;CMTS-MAC=00:01:5c:89:3e:46;CM-QOS=1.1;CM-VER=3.0;
tobiastheebe

Level 20
T.E.A.M.
  • 35284Posts
  • 2609Oplossingen
  • 17750Likes

Downstream is weak and exhibits noise due to DVB-T, 4G and 5G ingress/interference. The modem appears to be connected to an outdated TV/R outlet (TRAS-2000) instead of the AOP (main outlet). Ziggo only guarantees correct operation of the modem when it is connected to the AOP via a maximum of one splitter.


Could you post a picture of the electrical room/meter cupboard?

pablocassinerio
Topicstarter
Level 2
  • 7Posts
  • 0Oplossingen
  • 2Likes

Sure, here they are. I just moved here last week and the previous owner said he had that box installed for Ziggo.

 

1.jpeg

 

2.jpeg

 

 

tobiastheebe

Level 20
T.E.A.M.
  • 35284Posts
  • 2609Oplossingen
  • 17750Likes

Taking a closer look at the previous pictures, the apartment appears to be pre-1990, in which case the outlet in the living room is in fact the AOP. This is confirmed by the meter cupboard pictures.

 

The weak downstream power (should be at least -3.5 dBmV) and noise ingress require further investigation by a technician. I suspect a cable problem (i.e. damage) outside the apartment. A new AOP (btv 01-SET/UPC) should be installed as well.

 

A moderator (Ziggo employee) can schedule a technician appointment and will visit this topic within 1-2 days.

pablocassinerio
Topicstarter
Level 2
  • 7Posts
  • 0Oplossingen
  • 2Likes

Great, let's do that then. Thanks

Monica
Oud Community Moderator
Oud Community Moderator
  • 772Posts
  • 154Oplossingen
  • 262Likes

Hi @pablocassinerio, welcome to the Ziggo Community! I've scheduled an appointment for tomorrow, 11-03-2022 between 8:00-13:00. You will receive a confirmation of this appointment by e-mail. If the selected time-frame does not suit you, you can reschedule the appointment via the link in this e-mail and via your My Ziggo account. 

 

Will you keep us posted?

pablocassinerio
Topicstarter
Level 2
  • 7Posts
  • 0Oplossingen
  • 2Likes

Thank you Monica, that works for me.

Erik S
Oud Community Moderator
Oud Community Moderator
  • 2262Posts
  • 357Oplossingen
  • 547Likes

How did it go, @pablocassinerio? Has the issue been resolved by our engineer?

pablocassinerio
Topicstarter
Level 2
  • 7Posts
  • 0Oplossingen
  • 2Likes

Hi Erik, it's been a few days and so far the connection has been strong and stable, so I'd say the issue is solved. Thanks!

tobiastheebe

Level 20
T.E.A.M.
  • 35284Posts
  • 2609Oplossingen
  • 17750Likes

Just to be sure, could you post the downstream/upstream data once again? I assume a new AOP (wall outlet) has been installed?

Erik S
Oud Community Moderator
Oud Community Moderator
  • 2262Posts
  • 357Oplossingen
  • 547Likes

Sounds great @pablocassinerio! I will mark a solution for this topic and we'll leave it open for some weeks in case something changes. Thanks for your quick reply, have a lovely day!