Al sinds ik in dit huis woon is het bereik van de modem niet volledig. Een aantal van de slaapkamers zitten zonder WiFi, dan wel met een enorme trage verbinding. Daarvoor heb ik een TP-Link extender geplaatst. Deze laat echter ook geregeld te wensen over. Nu bedacht ik mij enkele dagen geleden dat ik ook nog een Airport Express heb.
Na veel zoeken op het internet, maar helaas het antwoord nog niet kunnen vinden, richt ik mij daarom maar tot jullie.
Is het mogelijk om deze Airport Express draadloos met het netwerk te verbinden en deze dan het netwerk uit te laten breiden? Ik kan hem wel gewoon met het netwerk verbonden krijgen, maar dan 'versterkt' die het bereik van de router helaas niet. Of kan dit enkel bedraad?
Ik hoor het graag,
Alvast bedankt,
Met vriendelijke groet,
Rutger Lensing
Best beantwoord door RutgerLensing
Ik heb het antwoord uiteindelijk toch kunnen vinden. Helaas het is niet mogelijk om enkel met een Express je netwerk uit te breiden. Hiervoor zijn dus minimaal 2 Expres-modellen of een Extreme of iets dergelijks nodig.
Zie stuk hieronder:
"Unfortunately, the AirPort Express can only wirelessly extend the signal from another Apple router, so it will not be able to connect to your provider's router and provide more wireless signal coverage using a wireless connection.
If you are able to locate the AirPort Express where it is needed to provide more wireless coverage, and connect it back to your provider's router using a permanent, wired Ethernet cable connection, the Express can be configured to provide additional wireless coverage that way.
If you cannot run the Ethernet cable, then it might be possible to use a pair of Ethernet over Powerline (EoP) adapters to send the signal over the existing AC powerlines in your home. The theory with these devices is that you already have the wiring in place, you just need the adapters.
Another option might be to use two AirPort Express devices......one close to your provider's router connected using a short Ethernet cable and the other located where you need more wireless signal coverage. In this case, the "remote" Express will be able to connect back to the "main" Express using a wireless connection."
Bekijk origineel
Zie stuk hieronder:
"Unfortunately, the AirPort Express can only wirelessly extend the signal from another Apple router, so it will not be able to connect to your provider's router and provide more wireless signal coverage using a wireless connection.
If you are able to locate the AirPort Express where it is needed to provide more wireless coverage, and connect it back to your provider's router using a permanent, wired Ethernet cable connection, the Express can be configured to provide additional wireless coverage that way.
If you cannot run the Ethernet cable, then it might be possible to use a pair of Ethernet over Powerline (EoP) adapters to send the signal over the existing AC powerlines in your home. The theory with these devices is that you already have the wiring in place, you just need the adapters.
Another option might be to use two AirPort Express devices......one close to your provider's router connected using a short Ethernet cable and the other located where you need more wireless signal coverage. In this case, the "remote" Express will be able to connect back to the "main" Express using a wireless connection."